C8051F064芯片解密
浏览次数:0
C8051F064 25 MIPS, 64 kB Flash, 16-Bit ADC, 100-Pin Mixed-Signal MCU
C8051F064 Analog Peripherals
Two 16-Bit ADCs
- ±0.75 LSB INL; no missing codes
- Programmable throughput up to 1 Msps (each ADC)
- 1 external input each; programmable as two single-ended or one differential
ADC
- DMA to XRAM or external memory interface
- Data-dependent windowed interrupt generator
Three Comparators
- 16 programmable hysteresis values
- Configurable to generate interrupts or reset
Internal Voltage Reference
Precision VDD Monitor/Brown-out Detector
On-Chip JTAG Debug & Boundary Scan
- On-chip debug circuitry facilitates full speed, non-intrusive in-system
debug (no emulator required)
- Provides breakpoints, single stepping, watchpoints, stack monitor
- Inspect/modify memory and registers
- Superior performance to emulation systems using ICE-chips, target
pods, and sockets
- IEEE1149.1 compliant boundary scan
High-Speed 8051 μC Core
- Pipelined instruction architecture; executes 70% of instructions in 1 or 2
system clocks
- Up to 25 MIPS throughput with 25 MHz system clock
- Expanded interrupt handler
Memory
- 4352 bytes data RAM
- 64 kB Flash; in-system programmable in 1024-byte sectors (1024 bytes
are reserved)
- External parallel data memory interface
Digital Peripherals
- 59 port I/O; all are 5 V tolerant
- Hardware SMBus™ (I2C™ compatible), SPI™, and two UART serial
ports available concurrently
- Programmable 16-bit counter/timer array with six capture/compare modules
- 5 general-purpose 16-bit counter/timers
- Dedicated watchdog timer; bidirectional reset
- Real-time clock mode using timers or PCA
Clock Sources
- Internal oscillator: 24.5 MHz, 2% accuracy supports UART operation
- External oscillator: Crystal, RC, C, or Clock
- Can switch between clock sources on-the-fly
Supply Voltage: 2.7 to 3.6 V
- Typical operating current: 18 mA at 25 MHz
- Multiple power saving sleep and shutdown modes
100-Pin TQFP
Temperature Range: –40 to +85 °C
详细介绍请参考:
C8051F064技术手册:C8051F064.PDF
提供Silicon C8051F064单片机解密服务,仅限学习、研究等合法用途。
联系方式:010-62245566 13810019655
C8051F064 Analog Peripherals
Two 16-Bit ADCs
- ±0.75 LSB INL; no missing codes
- Programmable throughput up to 1 Msps (each ADC)
- 1 external input each; programmable as two single-ended or one differential
ADC
- DMA to XRAM or external memory interface
- Data-dependent windowed interrupt generator
Three Comparators
- 16 programmable hysteresis values
- Configurable to generate interrupts or reset
Internal Voltage Reference
Precision VDD Monitor/Brown-out Detector
On-Chip JTAG Debug & Boundary Scan
- On-chip debug circuitry facilitates full speed, non-intrusive in-system
debug (no emulator required)
- Provides breakpoints, single stepping, watchpoints, stack monitor
- Inspect/modify memory and registers
- Superior performance to emulation systems using ICE-chips, target
pods, and sockets
- IEEE1149.1 compliant boundary scan
High-Speed 8051 μC Core
- Pipelined instruction architecture; executes 70% of instructions in 1 or 2
system clocks
- Up to 25 MIPS throughput with 25 MHz system clock
- Expanded interrupt handler
Memory
- 4352 bytes data RAM
- 64 kB Flash; in-system programmable in 1024-byte sectors (1024 bytes
are reserved)
- External parallel data memory interface
Digital Peripherals
- 59 port I/O; all are 5 V tolerant
- Hardware SMBus™ (I2C™ compatible), SPI™, and two UART serial
ports available concurrently
- Programmable 16-bit counter/timer array with six capture/compare modules
- 5 general-purpose 16-bit counter/timers
- Dedicated watchdog timer; bidirectional reset
- Real-time clock mode using timers or PCA
Clock Sources
- Internal oscillator: 24.5 MHz, 2% accuracy supports UART operation
- External oscillator: Crystal, RC, C, or Clock
- Can switch between clock sources on-the-fly
Supply Voltage: 2.7 to 3.6 V
- Typical operating current: 18 mA at 25 MHz
- Multiple power saving sleep and shutdown modes
100-Pin TQFP
Temperature Range: –40 to +85 °C
详细介绍请参考:
C8051F064技术手册:C8051F064.PDF
提供Silicon C8051F064单片机解密服务,仅限学习、研究等合法用途。
联系方式:010-62245566 13810019655